LICENSED INSULATION CONTRACTOR – CROWSNEST PASS, AB
Insulation Services in Crowsnest Pass by Patterson Insulation Ltd
Get a Free Quote
No pressure.
30%
ENERGY SAVINGS
5.0
STAR GOOGLE RATING
10+
YEARS EXPERIENCE
2 WK
LEAD TIMES
OUR SERVICES
Our Insulation Services in Crowsnest Pass
Patterson Insulation is a full-service insulation contractor serving Crowsnest Pass and Southern Alberta. From attics and basements to crawl spaces and spray foam air sealing, we install the right materials to seal the building envelope, lower energy bills, and keep every room comfortable through the prairie seasons. Explore our services below or call (403) 330-4282 for a free quote.
Attic Insulation
New attic insulation, removal, and replacement that stops heat loss through the ceiling and cuts winter heating bills in Crowsnest Pass homes.
Blown-In Insulation
Blown fiberglass and cellulose that fills attics and wall cavities to a consistent depth and a higher R-value without major renovation.
Spray Foam Insulation
Closed and open cell spray foam that air-seals and insulates in one step, ideal for rim joists, additions, and hard-to-reach assemblies.
Basement Insulation
Foam and batt systems that keep Crowsnest Pass basements warm, dry, and code-compliant while turning the lower level into usable living space.
Crawl Space Insulation
Crawl space insulation and vapour control that block ground cold and moisture and protect the structure and floors above.
Insulation Top-Up
Adding insulation over existing material to bring older Crowsnest Pass homes up to current R-value targets and lower year-round energy costs.
OUR REVIEWS
What Customers Are Saying About Patterson Insulation
BUILT FOR THE PRAIRIES
Insulation Built for Crowsnest Pass’s Climate
Crowsnest Pass sits in the Rocky Mountains about 100 km west of Lethbridge, the coldest and snowiest place we serve, with over 250 cm of snow in a season and a long mountain winter. Even with chinook moderation, it is a climate that punishes a leaky building envelope and a poorly insulated roof. Here is what we design for in every Crowsnest Pass project.
Cold Prairie Winters
Crowsnest Pass winters are long and snowy, with over 250 cm of snow a season and deep mountain cold. Proper attic and wall insulation keeps the cold out and stops your furnace from running non-stop.
Strong Chinook Winds
In the mountains west of Lethbridge, the Crowsnest Pass funnels some of the strongest wind in Alberta through the valley, with gusts that regularly top 90 km/h. Air sealing and spray foam stop the wind-driven drafts that loose-fill insulation alone cannot block.
Big Temperature Swings
Chinooks can swing temperatures more than 20 degrees in a day. A sealed building envelope keeps indoor comfort steady through rapid freeze-thaw cycles.
Hot, Dry Summers
Summer highs push past 30C. The same insulation that holds heat in winter keeps upper floors cool and lowers air conditioning costs.
Older Housing Stock
Around 45% of Crowsnest Pass homes were built before 1960, mostly coal-era miners’ houses. Topping up or replacing that settled insulation brings them up to standard and cuts the long-winter energy bills.
AREAS WE SERVE
Insulation Across the Crowsnest Pass Communities
In the Rocky Mountains west of Lethbridge, the Crowsnest Pass is a municipality of five historic coal-mining communities, Blairmore, Coleman, Bellevue, Hillcrest, and Frank, with some of the oldest housing and the deepest snow in the region. We insulate homes across all of them.
Blairmore & Coleman
The largest of the five communities and the busiest for us. Their coal-era and mid-century homes, many built before 1960, usually have minimal, settled insulation and are prime candidates for an attic top-up or a full removal and replacement.
Bellevue, Hillcrest & Frank
The smaller historic communities are full of original miners’ houses from the early 1900s. These old, often un-sealed homes face the Pass’s heavy mountain snow and cold, so they benefit most from a fresh, properly insulated and air-sealed attic.
Acreages & Mountain Properties
Beyond the townsites we insulate acreages, cabins, shops, and quonsets across the mountain valley toward the BC line. Spray foam is the go-to here, sealing and insulating in one step against deep cold and blowing snow.
Old Mountain Homes, Deep Snow, and the Ice-Dam Problem
The Crowsnest Pass is a special case. Around 45% of its homes were built before 1960, mostly coal-era miners’ houses across Blairmore, Coleman, Bellevue, Hillcrest, and Frank, and they sit in the snowiest, highest part of the region, where over 250 cm of snow can fall in a season. Old homes with little insulation, in the deepest mountain winter we serve, is the hardest combination there is on a heating bill.
It also creates a problem you see less often on the plains: ice damming. When an under-insulated, leaky attic lets heat escape, it melts the snow on the roof, which then refreezes at the cold eaves and backs water up under the shingles. The fix is the same thing that lowers the heating bill, a properly insulated attic at R-50 to R-60 with good air-sealing and balanced ventilation, so the roof stays cold and the snow stays put. In the Pass, getting the attic right protects both your comfort and your roof.
WHERE WE WORK
Where We Install Insulation in Crowsnest Pass
From century homes downtown to new builds on the west side and quonsets out in the County, we insulate just about every type of building in the region.
Houses & Bungalows
Single-family homes, bungalows, and two-storeys in every Crowsnest Pass neighbourhood, from the coal-era miners’ houses to the newer mountain builds.
Basements & Additions
Finishing a basement or building an addition? We insulate below-grade walls and new framing for warm, dry, code-compliant living space.
Garages & Shops
Heated garages, detached shops, and bonus rooms over garages, insulated and air-sealed so they stay usable through a Crowsnest Pass winter.
Agricultural & Quonsets
Quonsets, barns, shops, and outbuildings across the County. Spray foam stands up to dust, temperature swings, and condensation better than any other option.
Commercial Buildings
Offices, retail, warehouses, and multi-unit residential, insulated and fireproofed to commercial spec and coordinated with your construction timeline.
Acreages & Rural Homes
Rural properties around Crowsnest Pass, Coaldale, and Picture Butte, where higher heating loads make an efficient building envelope matter even more.
FULL-SERVICE CONTRACTOR
Complete Insulation Services in Crowsnest Pass
Patterson Insulation is a full-service insulation contractor, not just an installer. From the first assessment to removal, installation, air sealing, and the finishing details that make insulation actually perform, we handle the whole building envelope for homes, acreages, and commercial buildings across Crowsnest Pass and Southern Alberta.
Insulation Installation
From a single attic to a full new build, we install spray foam, blown-in, and batt insulation throughout Crowsnest Pass homes and commercial buildings. Every installation starts with the right R-value for the assembly and finishes with a tidy, code-compliant result that keeps heat where it belongs through the coldest prairie winters.
Insulation Removal
Old, settled, water-damaged, or rodent-contaminated insulation does more harm than good. We safely vacuum out and dispose of failed attic and wall insulation, sanitize the space, and prepare it for a fresh, high-performance system. It is a common first step in older Crowsnest Pass homes.
Insulation Repair & Top-Up
Insulation that has compressed, shifted, or been disturbed by trades or wildlife leaves cold spots and rising bills. We repair damaged sections and top up under-insulated attics to current R-value targets, restoring even temperatures without a full tear-out.
Air Sealing & Draft-Proofing
In Canada’s windiest city, air leakage is often a bigger problem than missing insulation. We seal gaps around top plates, attic hatches, pot lights, plumbing stacks, and rim joists so chinook winds stop driving drafts and dust through your home.
Attic Ventilation & Baffles
Insulation only performs when the attic can breathe. We install baffles and balance intake and exhaust ventilation so moisture dries out, summer heat escapes, and you avoid the frost build-up and ice damming that follow a warm, poorly vented attic.
Vapour Barrier & Moisture Control
The Alberta Building Code requires a sealed vapour barrier for good reason. We install and repair vapour barriers and use closed-cell spray foam where moisture resistance matters most, protecting framing and drywall from the condensation that forms when warm indoor air meets surfaces at -30 C.
Soundproofing Insulation
Insulation is not only about temperature. We add acoustic batt and spray foam to interior walls, floors, and shared assemblies to cut noise between rooms, levels, and suites. It is popular in rental suites, home offices, and media rooms.
New Construction Insulation
Building or renovating in Crowsnest Pass? We work from the plans and the framing stage to insulate walls, basements, and attics to meet or exceed National Building Code – Alberta Edition requirements, coordinating with your schedule so inspections pass the first time.
Free Energy Assessment
Not sure where your home is losing heat? We inspect your insulation, air sealing, and ventilation, measure existing R-values, and use thermal imaging to pinpoint exactly where energy escapes, then give you a clear written quote with no obligation.
R-VALUE & CODE
Insulation, R-Value, and the Alberta Building Code
R-value measures how well insulation resists heat flow: the higher the number, the slower heat escapes in winter and creeps in during summer. In Crowsnest Pass’s climate, hitting the right R-value is the difference between a furnace that cycles comfortably and one that runs all day. Here is what current code expects, and what it means for your home.
What current Alberta code calls for
The National Building Code – Alberta Edition (Section 9.36) sets minimum insulation levels for new and renovated homes:
Attics & ceilings: roughly R-50 to R-60 (RSI 8.67 to 10.43)
Above-grade walls: about R-22 (RSI 3.08) in the cavity
Basements & foundations: insulated to code for below-grade walls
Plus: a sealed vapour barrier and proper attic ventilation are both required
These are minimums. In a climate like ours, exceeding them where it is practical pays for itself in comfort and energy savings.
What it means for older Crowsnest Pass homes
With around 45% of Crowsnest Pass homes built before 1960, mostly coal-era housing, nearly every attic in the Pass sits far below today’s R-50 to R-60. That gap is exactly where heat escapes, where energy bills climb, and where ice dams begin.
The good news: topping up an attic from R-20 to R-60 is one of the most cost-effective upgrades a homeowner can make, and it rarely requires renovation. We measure your existing R-value during a free assessment, tell you exactly where you stand against code, and recommend the right combination of spray foam air sealing and loose-fill to get you there.
WHY CHOOSE US
Why Crowsnest Pass Homeowners Choose Patterson Insulation
We are a local, owner-operated insulation company with trained, certified installers who understand Alberta’s cold winters, hot summers, and relentless prairie wind. Every project begins with a thorough inspection so your furnace works less and every room of your home stays comfortable year round.
Local Crowsnest Pass Knowledge
We work in Crowsnest Pass homes every week, from coal-era miners’ houses to newer mountain builds. We measure insulation depth, inspect joists, walls, ceilings, and ventilation, and use thermal imaging to find exactly where air and heat escape your building.
Custom Material Recommendations
We explain closed cell versus open cell foam, fiberglass versus cellulose, and options for garage attics, basements, and knee wall spaces, then match the right type of insulation to your house, budget, and long term plans. Foam insulation can also be combined with blown loose fill for a hybrid solution that delivers higher R values throughout the building envelope.
Transparent Pricing and Guarantees
Every insulation project comes with a clear written estimate, straightforward timelines, no surprise costs, workmanship guarantees, and manufacturer backed product warranties. Get a free quote from our insulation company and learn more about how insulation can help reduce your average energy costs before work begins.
OUR PROCESS
Our Insulation Process
Every Crowsnest Pass insulation project follows a clear, step-by-step process from the first phone call to final cleanup. We provide professional-grade spray foam, blown-in, and batt installation with full protection of your interior space and a walkthrough of every completed improvement.
Free Quote and Inspection
01
Get a free on-site assessment where we collect information about your home, measure insulation depth, check existing materials, and inspect the attic, walls, basement, joists, and ceilings for air leaks, water staining, and code gaps.
Solution Design and Materials
02
We assess your insulation needs and recommend insulation spray foam for air sealing, blown loose fill for higher R values, or a hybrid combination, and will provide a written quote outlining materials, R values, and expected energy savings.
Preparation and Protection
03
We seal off work areas, protect floors, walls, and interior finishes, install baffles for efficient roof ventilation, and confirm safe clearances from recessed lights, chimneys, and mechanical equipment in the space.
Installation and Cleanup
04
Spray foam can seal penetrations and gaps while blown loose fill insulates to the specified depth; after installation we remove all debris and walk you through the completed building envelope improvements so you have a more efficient home.
AREAS WE SERVE
Our Crowsnest Pass and Southern Alberta Service Area
Patterson Insulation installs basement insulation throughout Crowsnest Pass and the surrounding towns and county hamlets of Southern Alberta. From north, south, and west side city neighbourhoods to nearby communities across the prairie, our crews seal and insulate foundations against the cold, so reach out for a free basement insulation quote and we will confirm service to your area.
OUR SERVICES
Patterson Insulation Ltd's Popular Services
Attic Insulation
Attic insulation solutions Lethbridge homeowners rely on to cut drafts, stop heat loss, and stabilize indoor temperatures.
- Ice dams and cold spots caused by poor attic insulation
- High heating and cooling bills from heat escaping through the roof
- Uncomfortable upstairs rooms that are too hot or too cold
- Settled or outdated attic insulation that no longer performs
- Moisture and condensation concerns from inadequate insulation coverage
Spray Foam Insulation
Spray foam insulation solutions for Lethbridge projects that need superior air sealing and long-term performance.
- Severe air leakage around framing, penetrations, and rim joists
- Hard-to-reach cavities that traditional insulation cannot seal well
- Moisture concerns in basements and crawl spaces
- Uneven temperatures from room to room
- Energy waste in older homes and renovation projects
Blown-in Insulation
Blown-in insulation solutions Lethbridge can rely on to improve attic performance, reduce heat loss, keep temperates consistent.
- Low attic insulation levels that allow heat to escape through the roof
- Settled or uneven insulation that no longer protects the home properly
- Cold rooms, drafts, and temperature swings caused by poor attic coverage
- High heating and cooling bills from under-insulated spaces
- Hard-to-cover areas where blown-in insulation can create more complete coverage
OUR SHOWCASE
Have a Look Through Our Past Work
TOP PRODUCTS
Brands We Use
Patterson Insulation, a trusted spray foam insulation company and foam insulation company serving Crowsnest Pass and surrounding area, uses tested brands that perform well in Alberta’s climate and meet Canadian building code requirements for thermal performance, fire safety, and moisture control. All products are tested for fire resistance, off gassing, and long term durability, and our insulation contractors follow manufacturer installation guidelines so you can learn more about each product’s performance before we begin.
Demilec
Icynene Lapolla
BASF Walltite
Owens Corning
CertainTeed
Johns Manville
Roxul Rockwool
Knauf Insulation
3M and Tremco
INSULATION FAQ
Insulation in Crowsnest Pass: Your Questions Answered
Straight answers for Crowsnest Pass homeowners across Blairmore, Coleman, Bellevue, Hillcrest, and Frank, where old mountain homes meet the deepest snow and longest winters in the region.
Can better attic insulation help prevent ice dams on my Crowsnest Pass roof?
My home is an old miners' house in Blairmore or Coleman. What insulation does it have?
Why does my mountain home cost so much to heat?
Do you insulate cabins, acreages, shops, and quonsets in the Pass?
What attic R-value should a Crowsnest Pass home have?
Do you serve all five Crowsnest Pass communities?
Can you remove old insulation from a heritage Crowsnest Pass home?
Is spray foam or blown-in better for a Crowsnest Pass home?
Patterson Insulation Ltd: Insulation Services in Crowsnest Pass
Patterson Insulation Ltd helps homeowners, contractors, and property managers across Crowsnest Pass and Southern Alberta improve energy efficiency, year-round comfort, and building envelope performance.
OUR OFFER